EUROLITE szett LED KLS lézer BAR PRO FX világítószett + M-4 hangszóró-állvány
Ár:
186.090 Ft
(146.528 Ft + ÁFA)
| Cikkszám: |
20000452 |
51741091 EUROLITE LED KLS Laser Bar PRO FX Light Set Bar with 2 strong derbies and spots, white/UV strobe LEDs, laser (RG, 2M) - 4-in-1 DMX light effect bar with laser, 2 rotating LED derbies, 2 LED spots and strobe LEDs in white and UV
- Enhanced version with very high brightness and additional UV LEDs
- Laser class 2M: does not require additional protective measures or appointment of a laser safety officer
- Ultra-light ideally suited for mobile use
- Crossbar with integrated DMX control unit and stand sleeve
- Comes pre-assembled with practical transport bag
- Convenient control via wireless foot switch and IR remote control
- 2 laser diodes project hundreds of red and green laser beams
- 2 rotating derbies for mirror ball effects with 6 bright LEDs (red, green and blue) each
- 2 spots with 6 bright 3in1 LEDs (red, green and blue) each
- Strobe effect with 4 bright 2in1 LEDs (white and UV)
- Auto, music, master/slave and DMX mode
- 39 built-in auto and music show programs that include all 4 effect units
- Addressing and setting via control panel with 4-digit LED display
- Sound-control via built-in microphone with sensitivity control
- Swivel mounting brackets for truss mounting
- When fog is used, this effect becomes especially attractive
- IEC terminals for power linking up to 8 units
- Switch-mode power supply for operation between 100 and 240 volts
- LED: Spot 2 x separate controlling each with 4 x high-power 2 W 2in1 BCL CW/UV (homogenous color mix)
- LED: Multi beam effect 2 x separate controlling each with 6 x high-power 2 W RGB
- LED: Strobe effect 6 x separate controlling with 6 x high-power 6 W 3in1 TCL RGB (homogenous color mix)
- Control: Sound to light via Microphone; Wireless footswitch; IR remote control; Stand-alone; DMX; preprogrammed in EASY SHOW
- Effect: Multi beam effect; Strobe effect; laser
60004185 OMNITRONIC M-4 Speaker-System Stand Aluminum speaker stand, max. load 18 kg, height 140-345 cm - Stable aluminum version
- Height adjustable in 10 steps, with locking pin
- Height: 140-345 cm
- Tube diameter: Ř 35 mm
- Centric load: 18 kg
- Scratch-resistant black finish
| 51741091 EUROLITE LED KLS Laser Bar PRO FX Light Set | | Power supply: | 100-240 V AC, 50/60 Hz | | Power consumption: | 150 W | | IP classification: | IP20 | | Power connection: | Mains input IEC connector (M) mounting version Power supply cord with safety plug (provided) | | Length of the cable: | 3 m | | Power output: | 1 x IEC connector (F) mounting version | | Fuse: | 5 x 20 mm T, 3.15 A | | LED: | Spot 4 x high-power 2 W 2in1 BCL CW/UV (homogenous color mix) | | Multi beam effect 6 x high-power 2 W RGB | | Strobe effect 6 x high-power 6 W 3in1 TCL RGB (homogenous color mix) | | Flash rate: | 0 - 30 Hz | | DMX channels: | 3; 5; 10; 28 | | DMX input: | 1 x 3-pin XLR (M) mounting version | | DMX output: | 1 x 3-pin XLR (F) mounting version | | Cable construction: | 3 x 1.0 mm˛ H05VV-F | | Cooling: | Cooling fan | | Control: | Sound to light via Microphone | | Wireless footswitch | | IR remote control | | Stand-alone | | DMX | | preprogrammed in EASY SHOW | | Beam angle (1/2 peak): | 13° | | Housing color: | Black | | Width: | 132 cm | | Height: | 32 cm | | Depth: | 14.5 cm | | Weight: | 10.75 kg | | laser | | Laser color: | 2in1 BCL RG | | Laser class: | Class 2M | | Laser module: | R red 100 mW 650nm | | G green 30 mW 532nm | | Foot control | | Battery: | 1 x 9.0 V E block 6F22 zinc carbon included | | Remote control | | Battery: | 1 x Button cell 3.0 V CR2025 lithium manganese built-in | | 60004185 OMNITRONIC M-4 Speaker-System Stand | | Maximum carrying capacity: | 18 kg | | Tube diameter sector: | 38 - 35 mm | | Height: | maximum: 3.45 m
minimum: 1.4 m | | Color: | Black | | Attachment: | Flange system Ř 35mm | | Type (general stands): | Speaker stand/manual | | Material: | Aluminum | | Additional dimensions: | Transport dimensions 140 cm x 13.5 cm | | Weight: | 3.30 kg |
|
| Gyártó: |
|
