Weboldalunk használatával jóváhagyja a cookie-k használatát a Cookie-kkal kapcsolatos irányelv értelmében.
Menü

MADRIX NEBULA

Ár:
161.290 Ft (127.000 Ft + ÁFA)
Cikkszám: 51860360
Gyártó:

Leírás



USB and Artnet interface to control pixels of LED strips, LED stripes, and LED tape

  • MADRIX NEBULA is a hardware interface to control your digital LED strips, LED stripes, and LED tape
  • Supports a wide range of LEDs: APA101 / APA102 / APA104 / APA106 / GS8207 / GW6201 / GW6205 / LPD1882S / LPD6803 / LPD8806 / MBI6120 / P9883 / SJ1221 / SK6812 / SK6822 / SM16703 / SM16716 / TLS3001 / TLS3008 / TM1804 / TM1809 / TM1812 / TM1814 / TM1829 / UCS1903 / UCS2903 / UCS512B3 / UCS8904 / UCS9812S / WS2801 / WS2803 / WS2811 / WS2811S / WS2812 / WS2812B / WS2813 / WS2815 / WS2818 / WS2822S / WS2822S Addressing (As of March 2019)
  • Additional LED types will be supported with future firmware updates
  • Drives up to 1360 RGB pixels (8 DMX universes / 4096 DMX Channels / 4096 single-color pixels / 1024 RGBW pixels) distributed equally over 2 ports
  • Supports a signal frequency of up to 24 MHz
  • The output protocol can be set separately for each of the 2 ports
  • Directly connects to the LEDs via 4-pin, pluggable screw terminals
  • Provides flexible power options: over USB (5 V) or via screw terminal (5 V to 24 V / 12 A) as well as routing through to LEDs with up to 6 A maximum load per port with various options on how to connect LEDs, power, and MADRIX NEBULA
  • Receives data over Ethernet network (Art-Net and/or Streaming ACN)
  • Can also be used as MADRIX USB interface
  • Works great with the MADRIX Software (sold separately) with quick and easy installation
  • Sync Mode: MADRIX Software and hardware allow you to synchronize Art-Net data for all output ports and even across multiple devices to get an optimal image on the LEDs without visual interruptions
  • Complies with the official protocol specifications and can be used as regular network unit with other 3rd-party consoles, controllers, or software solutions
  • Automatic HTP merging for two Ethernet sources
  • 2 Ethernet ports with daisy-chain support for the data connection without using a separate network switch or router
  • Useful settings for channels per universe, channel offset, channel order, and output in case of network connection loss, and more
  • 9 status LEDs, which can be turned off
  • Built-in web page for simple on-device configuration
  • Can be mounted on 35-mm DIN rails or walls via the provided wall-mount brackets
  • Non-conductive enclosure with IP20 and UL94 V-O flammability rating
  • Fanless, noiseless, and low-energy design
  • Ready within seconds after startup
  • Recommended for any small or large project
  • Multiple devices can be used together without problems
  • The firmware can be updated for future features
  • Quick start guide / technical manual available in English and German
  • User manuals also available at help.madrix.com
  • Made in Germany
  • More information available at www.madrix.com
  • Made in Germany

Technikai leírás



Power supply:5-24 V DC
Power connection:Mains input USB, type B Power supply cord for USB A mains connection (provided)
DMX channels:Output 4096
USB port:USB 2.0, Typ B
Width:7 cm
Height:4.5 cm
Depth:9.2 cm
Weight:0.27 kg